Footwear with toe protection against 200 J impact
FOOTWEAR | |
---|---|
SB |
BASIC REQUIREMENTS |
S1 |
SB + A + FO + E |
S1 P |
S1 + P |
S2 |
S1 + WRU |
S2 P |
S2 + P + Smooth sole |
S3 |
S2 + P |
BOOTS | |
S4 |
A + FO + E + Leakproofness |
S5 |
S4 + P |
A |
Antistatic footwear |
---|---|
E |
Energy absorption of seat region |
FO |
Resistance to fuel oil of outsole |
P |
Penetration resistance |
C |
Conductive footwear |
HRO |
Resistance to hot contact of outsole |
CI |
Cold insulation of sole complex |
HI |
Heat insulation of sole complex |
WR |
Water resistant footwear |
WRU |
Water resistant upper |
M |
Metatarsal protection |
AN |
Ankle protection |
CR |
Cut resistance of upper |
SRC |
(SRA+SRB) Slip resistant footwear |
Footwear with toe protection against 200 J impact
FOOTWEAR | |
---|---|
SB |
BASIC REQUIREMENTS |
S1 |
SB + A + E + Closed heel area |
S1 P |
S1 + P |
S1PL |
S1 + PL |
S1PS |
S1 + PS |
S2 |
S1 + WPA |
S3 |
S2 + P + Outsole with cleats |
S3L |
S2 + PL + Outsole with cleats |
S3S | S2 + PS + Outsole with cleats |
S6 | S2 + WR |
S7 | S3 + WR |
S7L | S3L + WR |
S7S | S3S + WR |
BOOTS | |
S4 |
A + E + Outsole with cleats + Closed heel area |
S5 |
S4 + P |
S5L |
S4 + PL |
S5S | S4 + PS |
P |
Perforation resistance with metallic midsole (nail Ø 4,5 mm) |
---|---|
PL |
Perforation resistance with non metallic midsole (nail Ø 4,5 mm) |
PS |
Perforation resistance with non metallic midsole (nail Ø 3 mm) |
C |
Electrical resistance - partially conductive footwear |
A |
Antistatic footwear |
CI |
Cold insulation of sole complex |
HI |
Heat insulation of sole complex |
E |
Energy absorption of seat region |
WR |
Water resistant footwear |
M |
Metatarsal protection |
AN |
Ankle protection |
CR |
Cut resistance of upper |
SC |
Abrasion resistance of the overcap |
SR |
Slip resistant footwear (optional glycerol test) |
Ø |
Test of slip resistance, not carried out on footwear for special use with tips, metal heels or similar, for performances on soft grounds (sand, mud, wood, etc). |
WPA |
Penetration and absorption of water |
HRO |
Resistance to hot contact of outsole |
FO | Resistance to fuel oil of outsole |
LG | Grip on ladder |
Non safety shoes
FOOTWEAR | |
---|---|
OB |
BASIC REQUIREMENTS |
O1 |
OB + A + E |
O1 P |
O1 + P |
O2 |
O1 + WRU |
O2 P |
O2 + P + Smooth sole |
O3 |
O2 + P |
BOOTS | |
O4 |
A + E + Leakproofness |
O5 |
O4 + P |
A |
Antistatic footwear |
---|---|
E |
Energy absorption of seat region |
FO |
Resistance to fuel oil of outsole |
P |
Penetration resistance |
C |
Conductive footwear |
HRO |
Resistance to hot contact of outsole |
CI |
Cold insulation of sole complex |
HI |
Heat insulation of sole complex |
WR |
Water resistant footwear |
WRU |
Water resistant upper |
M |
Metatarsal protection |
AN |
Ankle protection |
CR |
Cut resistance of upper |
SRC |
(SRA+SRB) Slip resistant footwear |
Non safety shoes
FOOTWEAR | |
---|---|
OB |
BASIC REQUIREMENTS |
O1 |
OB + A + E + Closed heel area |
O1 P |
O1 + P |
O1PL |
O1 + PL |
O1PS | O1 + PS |
O2 |
O1 + WPA |
O3 |
O2 + P + Outsole with cleats |
O3L |
O2 + PL + Outsole with cleats |
O3S |
O2 + PS + Outsole with cleats |
O6 | O2 + WR |
O7 | O3 + WR |
O7L | O3L + WR |
O7S | O3S + WR |
BOOTS | |
O4 |
A + E + Outsole with cleats + Closed heel area |
O5 |
O4 + P |
O5L |
O4 + PL |
O5S |
O4 + PS |
P |
Perforation resistance with metallic midsole (nail Ø 4,5 mm) |
---|---|
PL |
Perforation resistance with non metallic midsole (nail Ø 4,5 mm) |
PS |
Perforation resistance with non metallic midsole (nail Ø 3 mm) |
C |
Electrical resistance - partially conductive footwear |
A |
Antistatic footwear |
CI |
Cold insulation of sole complex |
HI |
Heat insulation of sole complex |
E |
Energy absorption of seat region |
WR |
Water resistant footwear |
M |
Metatarsal protection |
AN |
Ankle protection |
CR |
Cut resistance of upper |
SC |
Abrasion resistance of the overcap |
SR |
Slip resistant footwear (optional glycerol test) |
Ø |
Test of slip resistance, not carried out on footwear for special use with tips, metal heels or similar, for performances on soft grounds (sand, mud, wood, etc). |
WPA | Penetration and absorption of water |
HRO | Resistance to hot contact of outsole |
FO | Resistance to fuel oil of outsole |
LG | Grip on ladder |
Standard specification for performance requirements for protective (safety) toe cap footwear
I/75 |
Toe caps footwear exceeding impact |
---|---|
C/75 |
Toe caps footwear exceeding compression |
PR |
Puncture resistant footwear |
EH |
Boots and shoes with Electrical Hazard protection |
SD |
Static dissipative boots and shoes fall in the range of 10-6 - 10-8 Ohm to protect against the hazards of static build-up in the workplace |
MT/75 |
Metatarsal protection footwear |
Protective footwear
Toe cap protection with puncture resistant sole |
|
Toe cap protection without puncture resistant sole |
|
Electrical shock resistance footwear |
|
Chainsaw protective footwear |
|
Static dissipative footwear |
|
Super static dissipative footwear | |
Metatarsal protection |
Dir. 89/686/CEE |
Directive of the Council regarding the standardization of legislation of Member States in the PPE field |
Regulation (UE) 2016/425 |
of the European Parliament and of the Council on Personal Protective Equipment |
EN ISO 20345:2011 |
Personal Protective Equipment - Safety footwear |
EN ISO 20345:2022 |
Personal Protective Equipment - Safety footwear |
EN ISO 20347:2012 |
Personal Protective Equipment - Protective footwear |
EN ISO 20347:2022 |
Personal Protective Equipment - Protective footwear |
EN ISO 13287:2012 |
Personal Protective Equipment - Footwear - Methods for determination of slip resistance |
IEC 61340-5-1:2017 |
Protection of electronic devices against electrostatic phenomena - General regulations |
IEC 61340-4-3:2018 |
Standard test methods for specific applications - Methods to characterise the electrostatic protection in combination with flooring and footwear put on a person |
EN ISO 17249:2013 |
Chainsaw cut resistant footwear |
EN ISO 15090:2012 |
Footwear for firemen |
EN ISO 20349-1:2017 |
PPE: test methods and requirements for protection against risks encountered in foundries |
EN ISO 20349-2:2017 |
test methods and requirements for the protection against risks encountered in welding and allied process |
EN ISO 12568:2010 |
Foot and leg protectors - Requirements and test methods for toecaps and penetration resistant inserts |
EN ISO 22568-1:2019 |
Foot and leg protectors requirements and test methods for components of safety footwear - metallic anti crushing devices |
EN ISO 22568-2:2019 |
Foot and leg protectors requirements and test methods for components of safety footwear non metallic anti crushing devices |
EN ISO 22568-3:2019 | Foot and leg protectors requirements and test methods for components of safety footwear metallic anti perforation devices |
EN ISO 22568-4:2021 | Foot and leg protectors test methods and requirements for components of safety footwear non metallic anti perforation devices |
EN ISO 381-3:1996 |
Protective clothing for users of hand-held chain saws. Test methods for footwear |
EN ISO 20811:1992 |
Determination of resistance of textile to water penetration - hydrostatic pressure test |
EAC |
Technical regulation on the safety of Personal Protective Equipment distributed in the territory of the Eurasian Customs Union |
UKCA |
New product conformity marking, used for most of the products placed on the Great Britain market (England, Wales and Scotland) now covered by regulations and directives for EC marking |
ASTM F2412-11 |
Standard test methods for foot protection |
ASTM F2412-18a |
Standard test methods for foot protection |
ASTM F2413-11 |
Standard specification for performance requirements for protective (safety) toe cap footwear |
ASTM F2413-18 |
Standard specification for performance requirements for protective (safety) toe cap footwear |
CAN/CSA Z195-14 |
Protective footwear |